Unmounted Nonwoven Flap Wheels

  1. Product
  2. Flap Wheels
  3. Unmounted Flap Wheels
  4. Unmounted Nonwoven Flap Wheels
.Nylon 6.6. Fibers with Abrasive Grains
.Available in Aluminium Oxide and Silicon Carbide Grains
.Coarse,Medium,Fine and Veryfine grits
.Available in Soft and Hard form
Used for Flat Surface Sanding
.Dry Sanding
.Used for satin finish
.Works very well on Stainless Steel and can be used for other metals
.Longer Life than conventional type
.Constant Finish untill the end
Diameter mm    -  Width  - Shaft  inch
.150x25x20                 6''x1''x3/4''
.150x50x20                  6''x2''x3/4''
.165x25x45             6-1/2''x1''x1-3/4''                     
.165x50x45             6-1/2''x2''x1-3/4''                         
.200x25x65                 8''x1''x2-9/6''                         
.200x50x65                   8''x2''x2-9/6'              
.250x25x65                 10''x1''x2-9/6''
.250x50x65                 10''x2''x2-9/6'
.300x25x110          11-11/16'' x1''x4-5/16''
.300x50x110          11-11/16'' x2''x4-5/16''
.Impregnated Nylon 6.6. Fibers with Abrasive Grains
.Available in Aluminium Oxide 
.Coarse,Medium,Fine and Very fine grits

.Used for Flat Surface Sanding
.Dry Sanding
.Used for satin finish
.Works very well on Stainless Steel and can be used for other metals
.Very High Cut Rate Performance
.Maximum Life time
.Saves time 
.Constant Finish untill the end

Diameter mm    -  Width  - Shaft  inch
.150x25x20                 6''x1''x3/4''
.150x50x20                  6''x2''x3/4''
.165x25x45             6-1/2''x1''x1-3/4''                     
.165x50x45             6-1/2''x2''x1-3/4''                         
.200x25x65                 8''x1''x2-9/6''                         
.200x50x65                   8''x2''x2-9/6'              
.250x25x65                 10''x1''x2-9/6''
.250x50x65                 10''x2''x2-9/6'
.300x25x110          11-11/16'' x1''x4-5/16''
.300x50x110          11-11/16'' x2''x4-5/16''